大型시료(시편) 절단기 (Cutting Machine)

 

             C-4 (15인치 : 350V)                                    C-5 (15인치 : 350VS)



       특징 : Abrasive Cut Off Wheel을 사용하여 절단하는 대형절단기입니다


       -Mortor Shaft와 Wheel Shaft를 V-belt로 연결하여 Wheel을 구동시킴

       -Vise는 고정이고 Wheel Shaft가 Gas쇼바의 작동에 의하여 상하로 작동하여 시료를 절단

       -투시창을 PC를 사용하여 내충격 및 내열재질로 안전에 유의

       -투시구를 설치하여 긴 시료도 절단 가능

       -T-Slot형 Vise Clamping Bed 사용


                  커팅기 내부                                    대형 T-Slot   




                       T-Slot                                      Quick Vise



  Specification


 

C-4 (15인치 : 350V) 

C-5 (15인치 : 350VS)

Power

Motor

RPM

Wheel 크기

절단능력

Vise

Vise 크기

순환장치

순환장치용량

Dimension

220/440V

AC 7.5HP 4P 3상

2700 ~ 2800 rpm

∅32 x ∅355 x 3t

∅10 ~ ∅120

Screw 또는 Quick Vise

120mm(거리) x 80mm(높이)

Pump Motor : 100W 또는 200W 3상

75ℓ/min

800 x 950 x 900/550(W x D x H)mm

220/440V

AC 3HP 4P 3상

2700 ~ 2800 rpm

∅32 x ∅255 x 1.2t

∅3 ~ ∅80

Screw 또는 Quick Vise

80mm(거리) x 45mm(높이)

Pump Motor : 100W 3상

40ℓ/min

750 x 900 x 900/450(W x D x H)mm



 TEL : 02-868-0661 (代)                  pcb21@korea.com    

 

시료 및 웨이퍼용 시편절단기(Cutting Machine) & Diamond SAW

diamond saw/다이아몬드소/시편절단기

DMT6 High Speed Diamond Cut-off Saw with 5 pcs 6.5" impregnated diamond blades

DMT100 Mini Diamon Band Saw with Two 37.7" loop diamond blades

diamond saw/다이아몬드소/시편절단기

DMT4 High Speed Diamond Cut-off Saw with Vise and 5 pcs 4" diamond blades

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DMT200 Heavy Duty High Speed Abrasive Cut-off Saw with two 10" SiC cutting blades

DQG50 High Speed Abrasive Cut-off Saw with Double quick Clamps

diamond saw/다이아몬드소/시편절단기/시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DSYJ150 Digital Low Speed Diamond Saw with complete accessories

diamond saw/다이아몬드소/시편절단기/시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DSXJ2 Precision Endless Wire Saw with 2" Digital Travel and Two Angle Adjustable Sample Stage

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DSYJ200 Automatic Section Saw ( 8") with complete accessories

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DEC400 Precision CNC Dicing / Cutting Saw with Accessories & Software

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DSTX602 Precision Wire Saw with Sample Stage and Diamond Wire

 

 

 

diamond saw: 다이몬드 커터기

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

DSYJ150 low speed diamond saw equips with advanced digital micrometer and digital speed displaceis, it is perfect tool for cutting / dicing / slicing all kinds of materials upto 30 mm thickness, especially for brittle crystals, ceramics, and TEM samples.  MTI has tried every effort to make the low speed diamond saw at such high quality and low price. It makes every research lab affordable.

Typical Specifications

 

 This is a SiC blade: 4" x 0.35 mm x 0.5" arbor for cutting nonferrous metal materials, such as superalloys.

 

This is a Al2O3 blade: 4" x 0.35 mm x 0.5" arbor for cutting ferrous metal materials, such as iron and steel.

 This is a full sintered diamond blade: 4" x 0.35 mm x 0.5" arbor for cutting crystals and ceramic materials

 

 

하기 제품에 대한 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.
diamond blade/Diamond Cutting Blade/초정밀 다이아몬드휠/diamond wheel/다이아몬드 컷터 블레이드/다이아몬드 톱날  

Diamond Cutting blades

3", 4", 5" 6" 8" 10" 14"

 

Diamond Lapping Plates

320 - 2000 mesh 8"- 12" lapping plate

 

Diamond Cutting Wires

Dia 0.2 -0.3 mm wire: straight and loop

 

Diamond Mrico-Drills

 

 

Accessories for Cutting Saws

Vise, spacer, pumps

 

Abrasive Sand Paper Discs

 

 

Cutting Blades / Wire

 

 

Diamond Lapping Discs

 

 

Diamond Polishing Paste

 

 

Polishing Pads / Cloths

 

 

Polishing Slurry & Lubricate

 

 

Wax / Glue

 

 

Sampel Mounting Accessories

 

 

Coolant / Slurry Pump

 

 

Accessories relatd cutting & Polishing Machines

다이아몬드 커터기(Diamond SAW)에 관심이 계시면 여기를 클릭해 주십시오.

  

모델명 DMT4 High Speed Diamond Cut-off Saw with Vise and 5 pcs 4" diamond blades

Manual 4" Diamond High Speed Cut-off Saw with Vise and 5 pcs of 4"Dia x 0.35 mm x 0.5" Arbor Impregnated Diamond Cutting Blades

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

 Features

  • 4" Manual Cut-off Saw is the perfect tool for quickly cutting valuable materials, such crystal rough, ceramic, metal rod and almost any material before lapping and polishing.
  • The saw table is flat so it is easy to trim oversized slabs and removable so clean up is easy.  The sturdy table measures 6" X 10", easy to operate.
  • The saw housing is made of unbreakable cross-linked polyethylene - No Rusting, No messy oil, uses water only.
  • The 1/4 HP equivalent variable speed ball bearing direct drive motor allows the saw to run fast enough to use ultra thin diamond blades and it is powerful enough for impregnated diamond blades.   Speed varies from 400 -3250 RPM
  • Max. cutting depth: 1" (25.4 mm)
  • Comes with 5 pcs of impregnated diamond blade of 4" Dia x 0.014" (0.35 mm ) thickness x 1/2" arbor, as well as a vise which allow you keep sample smoothly.
  • Voltage: 110V AC  ( in order to use at 220-240V , you need)
  • Shipping dimension: 16" x 13" x 11"
  • Shipping weight :16lbs
  • Two Years limited warranty

 

4"Dia x 0.35 mm x 0.5" Arbor Impregnated Diamond Cutting Blade

시편절단기, diamond saw, diamond cutter, diamond wheel, diamond blade, 다이아몬드톱날, 다이아몬드날

TEL : 02-868-0661 (代)                  pcb21@korea.com   Email

 

핫 마운팅(Hot mounting)

핫 마운팅(Hot mounting)

 

DCXQ1500 Vacuum Cold Mounting Device  
CXQ1500 Vacuum Cold Mounting Device
 
Detailed Description

CQX1500 vacuum cold mount device is designed for making quality cold mount without gas bulbs, especially for mounting precion IC and small electronic sample.

CQX1500 comes with vacuum pump and glass vacuum tighten jar.  Operation procedures are as the follows:

  • Place sample  with cold mount mould into the vacuum jar, and target injection tube to the mould ( cold injection tube switch )
  • Start vacuum pump to allow all gas to come out the jar,
  • Insert injection tube to cold mount liquid bottle
  • Target the inject tube to sample to mount, and open switch on the tube
  • Then, cold mount liquid will flow into the mould inside vacuum jar
  • Close switch when mounting is full
  • You will get a gas bulb free precision cold mount sample

Specifications:

  • Power:  110V / 240V AC, 100W
  • Vacuum:  -0.09 MPa
  • Glass Vacuum Jar:  200 mm in diameter
  • Dimension:  300mm x340mm x250mm
  • Net Weight:    32kgs

 

핫 마운팅(Hot mounting)

 

MP300 Mounting Press for Metallographic Samples  
MP300 Mounting Press for Metallographic Samples

Detailed Description

MP300 automatic mounting press is used to encapsulate samples for metallographic preparation. One mounts can be produced at one time using the mold spacer at 22 mm diameter. The one cycle time is up to 30 minutes.

  • Technical Specifications  

     

    Item

    Unit

    Parameter

    Power

    W

    Up to 700

    Voltage

    V

    AC 110 V

     (AC 220V  is available as an option)

    Temperature Control Range

    o C

    100 - 180

    Time control Range

    Min.

    1 - 30

    Pressure control

     

    Hand wheel with  Pressure ready sensor

    Compression Mold

    mm

    Standard: D22xH15

    Machine Dimension

    mm

    400x290x400

    Machine Net weight

    Lb.

    72.6

 다이아몬드 커터기(Diamond SAW)에 관심이 계시면 여기를 클릭해 주십시오.

 

폴리셔(Polisher) 및 다이아몬드 커터기(Diamond SAW 원자재 공급)  

 

3"Dia x 0.2 mm x0.5" arbor Fully Sintered Diamond Cutting Blades For Low Speed Saw - DF0302

3"Dia x 0.3 mm x 0.5"arbor Fully sintered Diamond Cutting Blades For Low Speed Saw - DF0303

86 mm OD x 0.1 mm thickness Diamond Cutting Blades with 0.5" arbor Flange

86 mm OD x 0.1 mm thickness Diamond Dicing Blades

Three 4"Dia x 0.3 mmx0.5" arbor Impregnated Diamond Cutting Blades For Cutting Saw- - Low Cost - IPDB40305

4"Dia x 0.35 mm t x 0.5" arbor Fully Sintered Diamond Cutting Blades For all brands Low Speed Saw - DF0403

4" Dia x 0.014" t x0.5" arbor Sintered Diamond Blade - DB153742

4"Dia x 0.4 mm x0.5" arbor Alumina Abrasive Cutting Blade For Low Speed / Trim Saw (AL0404)

4"Dia x 0.4 mm x0.5" arbor SiC Abrasave Cutting Blades For Low Speed / Trim Saw (SC0404)

Two 6 1/2" Dia x 0.5mm t x0.5" arbor Impregnated Diamond Cutting Blades - IPDB6050505

6" Dia x 0.014"t x 5/8" arbor Metal Bond Diamond Wafering Blade - MBD0504

6" Dia x 0.014" t x0.5" arbor Sintered Diamond Blade - DB-153744

7" Dia x 0.03" t x0.5" arbor SiC Abrasave Cutting Blades For Cut-off Saw ( MT-6) - SC0708

8" Dia x 0.025" t x1.0" arbor Sintered Diamond Blade - DB-153741

10" Dia x 0.075" t x1.25" arbor SiC Abrasave Cutting Blades For Cut-off Saw ( MT200) - SC1075

14" Dia x 0.075" t x1.25" arbor SiC Abrasave Cutting Blades For Cut-off Saw ( MT350) - SC1408

 

TEL : 02-868-0661 (代)                            pcb21@korea.com    

 

다이아몬드 커터기(Diamond SAW)에 관심이 계시면 여기를 클릭해 주십시오.

 

폴리셔(polisher:시편절단기)에 관심이 계시면 여기를 클릭해 주십시오.

 

                                                 

 grinding / polishing machines / Polisher: 폴리셔

 

manufactures and distributes all types grinding / polishing machines from 3" to 15" platen  for research laboratories in martial engineering, semiconductor failure analysis, precision optics and lapidary hobbyists.  If you have any need for polishing machine, please call our expert at 02-868-0661 to find a cost-effective solution.  We always keep standard grinding / polishing machines and related accessories in stock for immediate delivery, please choose and order them from below:  e-mail: pcb21@korea.com

    하기 제품에 대한 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.

 

Unipo820 Heavy Duty ( 8") Dual Platens Grinder/ Polisher with Magnetic Plates & Complete Accessories

폴리셔/시편연마기/polisher/polishing machine

Unipo800 Economic Grinding / Polishing Machine with Complete Diamond Lapping Accessories

polisher/Grinder/폴리셔/시편연마기/polishing machine

Unipo801 Multi Purpose Precision Polishing Machine with York Support & Complete Accessories

POLISHER/GRINDER/폴리셔/그라인더/POLISHING MACHINE

Unipo802 (8" ) Precision Auto Lapping and Polishing Machine with two work stations

POLISHER/GRINDER/폴리셔/그라인더/POLISHING MACHINE

Unipo830 Heavy Duty Belt driven 8" Grinder / Polisher with Magnetic Plates & Complete Accessories

POLISHER/GRINDER/폴리셔/그라인더/POLISHING MACHINE

Unipo1000 (10" ) Precision Auto Polishing Machine with 6" Power Head

2" Polishing Fixture for Precision / Automatic Thinning and Polishing

POLISHER/GRINDER/폴리셔/그라인더/POLISHING MACHINE

Unipo1210 Heavy Duty ( 12") Precision Grinding / Polishing Machine with Magnetic Plate & Complete Accessoies

polisher/Grinder/폴리셔/시편연마기/polishing machine

UNIPO1501(15") PRECISION LAPPING & POLISHING MACHINE

POLISHER/GRINDER/폴리셔/그라인더/POLISHING MACHINE

Unipo1202 (12" ) Precision Auto Lapping and Polishing Machine with Two 4" Work Stations, EQ-Unipo1202

polisher/Grinder/폴리셔/시편연마기/polishing machine

UNIPO1502 (15") Precision Automatic Lapping / Polsihing Machine with Three 4" Work Stations

 

상기 품목중 원하시는 제품을 모델명으로 문의 하시면 자세한 스팩을 보내드립니다. 본사의 사정상 모델명은 변경이 될 수 있습니다.

 

TEL : 02-868-0661 (代)                  pcb21@korea.com

 

하기 제품에 대한 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.

 

diamond wheel/다이아몬드휠/diamond cutting blade  

Diamond Cutting blades

3", 4", 5" 6" 8" 10" 14"

 

Diamond Lapping Plates

320 - 2000 mesh 8"- 12" lapping plate

 

Diamond Cutting Wires

Dia 0.2 -0.3 mm wire: straight and loop

 

Diamond Mrico-Drills

 

 

Accessories for Cutting Saws

Vise, spacer, pumps ---

 

Abrasive Sand Paper Discs

 

 

Cutting Blades / Wire

 

 

Diamond Lapping Discs

 

 

Diamond Polishing Paste

 

 

Polishing Pads / Cloths

 

 

Polishing Slurry & Lubricate

 

 

Wax / Glue

 

 

Sampel Mounting Accessories

 

 

Coolant / Slurry Pump

 

 

Accessories relatd cutting & Polishing Machines

polisher/폴리셔/polishing machine  

3" - 6" Polishing machines

 

polisher/폴리셔/polishing machine  

8" -10" Polishing machines

 

 

Consumables for grinding/polishing

 

 

Accessoires related to polishing

 

 

폴리셔/시편연마기/polisher/polishing machine

 

Unipo300 Mini (3") Automatic Grinder/ Polisher with Complete Accessories    
Unipo300 Mini (3") Automatic Grinder/ Polisher with Complete Accessories
Detailed Description

Unipo300 is a automatic mini-grinder / polisher for preparing TEM, metallography, and substrate samples in a single mount. The machine equips with many advanced features, such as 3" fix lapping plate, variable sample moving speed, adjustable pressure load and selectable time switch to achieve attention free polishing. Unipol 300 simulates human hand to grind and polish sample via randomly moving sample holder on top versus fixed 3" plate.   It is very suitable for preparing < 1" dia specimen in  low volume laboratory for material research, failure analysis and medical test.  By combining our  DSYJ-150 low speed saw,  you can own a processing lab on one desk to prepare versatile specimen at affordable budget.

 

 Features:

  • Easy to use and affordable price.
  • Variable moving speed for the sample holder on top
  • Adjustable pressure load by a spring inside from 0 - 5 Newtons
  • Automatic timer setting from 0 to 99 hours
  • One rubber polishing bowl with one 3" glass lapping plates are included
  • Extra rubber bowl and 3" glass lapping plate are available as option.
  • Two 1" dia. sample holders are included
    • one for flat sample as shown inside plate in the picture left
    •  Another holder for inserting bulk sample as shown on top machine.
    • Compressing or cold mount sample can be used as sample holder ( make a hole in round sample mount ceneter, put movong rod on the hole )
  • Power:  AC 110V and 220V selectable for worldwide operation.
  • Max. moving weight of specimen:  200g
  • Max. sample size:  25 mm dia.  x  20 mm H
  • Overall dimension: 420mm L x 190mm W x 210mm H.
  • Net Weight:  24 lbs
  • Package dimension: 18" x 11" x 9"
  • Shipping weight: 32 lbs

 폴리셔/시편연마기/polisher/polishing machine

3" glass lapping plate ( front & back )

Standard Package Included in the Unipol 300 Grinder / Polisher

 P/N

 Item Name

 DUP-300-01  Unipol 300 Grinding / Polishing Machine
 DUP-300-02  Rubber polishing bowl
 DUP-300-03  3" glass lapping plate
 DUP-300-04  1" dia. sample holder for flat sample
 DUP-300-05  1" dia. sample holder for inserting bulk sample
 DUP-300-06  AC power cord
 DUP-300-07  Operation manual
 DUP-300-07  1 set of 3 syringes (10g) diamond paste with 0.25, 1.0, and 3.0 micron grit

폴리셔/시편연마기/polisher/polishing machine

 

Unipo830 Heavy Duty Belt driven 8" Grinder / Polisher with Magnetic Plates & Complete Accessories  
Unipo830 Heavy Duty Belt driven 8" Grinder / Polisher with Complete Accessories
Detailed Description

 

Unipo830 Heavy Duty Belt Driven  8" Grinder / Polisher

UNIPOL- 830 is heavy duty 8" grinder / polisher  with belt driven and quiet operation. It comes with magnetic disk and complete accessories and allow user to change grinding / plishing plates at quick and easy.  It  is ideal tool for preparing matellurgraphic sampel manually

Features

  • Heavy duty fiberglass case with anti corrosion painting surface.
  • Belt driven 8" platen with high torgue, which  is much stable than Unipo800
  • Power:         110V or 220 V  switchable power supply, worldwide support
  • Motor:          300W DC motor with belt pulley
  • Variable speed:             from 0 - 600 RPM with digital display for each plate
  • 8" Aluminum lapping plates can be quickly released and installed.
  • Soft rubber splash guard for safe operation
  • Dimension:                    490mm x350mm x250mm
  • Aprox. net weight:          36 Kg  
  • Complete accessories included for immedate use ( > value )
    • One Aluminum alloy master  plate  8" dia lapping plate
    • One 8" dia.x 0.8 mm thick permanent magnetic sheet with PSA backing (  installed in Aluminum plate )
    • One 8" dia. Diamond Lapping plates with 320 mesh and 600mesh separately (without PSA, can be attach to mangnetic plate directly )
    • Two 8" dia x 0.7mm thick steel buffer sheet (Zinc coated) for carrying sand paper and polishing pad, which can be attached to magnetic plate at stable and take off at easy
    • Four pacs 8" Sic sand papers ( 2 of each at mesh of 240#, 400# , 800# ,1500# )
    • One 8" PSA black polishing pads for final polishing 
    • One 10g  1.0 micron diamond paste for faster polishing
     
  • Shipping package dimension: 
  • Shipping weight :  95 lbs                    

폴리셔/시편연마기/polisher/polishing machine

 

Unipo820 Heavy Duty ( 8") Dual Platens Grinder/ Polisher with Magnetic Plates & Complete Accessories  
Unipo820 Heavy Duty ( 8") Dual Platens Grinding / Polishing Machine with Magnetic Plates & Complete Accessories
Detailed Description

 

 Unipo820  Dual Plates 8" Grinding / Polishing Machine with Magnetic Plates and Complete Accessories

UNIPOL-820 is heavy duty  grinding / polishing machine with two 8" lapping plates and independent speed control. Upgraded magnetic plates were installed in the machine, which make install sand paper / polishing pad quicklt and easily.  UNIPOL-820 is perfect for metallographic lab to prepare small sample faster and easier

Features :

  • Heavy duty fiberglass case with anti corrosion painting surface
  • Belt driven platen with stable and quiet operation
  • Power:         110V or 220 V  switchable power supply, worldwide support
  • Motor:          Two  300W high torque DC motor with belt pulley with independent speed control
  • Variable speed:             from 0 - 600 RPM with digital display for each plate
  • Two 8" Aluminum lapping plates can be quickly released and installed.
  • Soft rubber splash guard ring for safe operation
  • Dimension:                    580 L x 420 W X 350 H (mm) 
  • Aprox. net weight:          44 Kg  
  • Complete accessories included for immedate use ( > value )
    • Two Aluminum alloy master  plate  8" dia lapping plate
    • Two 8" dia.x 0.8 mm thick permanent magnetic sheet with PSA backing (  installed in Aluminum plate )
    • Two 8" dia. Diamond Lapping plates with 320 mesh and 600 mesh separately (without PSA, can be attach to mangnetic plate directly )
    • Four 8" dia x 0.7mm thick steel buffer sheet (Zinc coated) for carrying sand paper and polishing pad, which can be attached to magnetic plate at stable and take off at easy
    • Eight pacs 8" Sic sand papers ( 2 of each at mesh of 240#, 400# , 800# ,1500# )
    • Two 8" PSA black polishing pads for final polishing 
    • One 10g  0.25 micron diamond paste for faster polishing
  • Shipping package dimension:  42" x 48" x 25"
  • Shipping weight :  160 lbs                    

폴리셔/시편연마기/polisher/polishing machine

TEL : 02-868-0661 (代)                  pcb21@korea.com

폴리셔/시편연마기/polisher/polishing machine

 

Unipo800 Economic Grinding / Polishing Machine with Complete Diamond Lapping Accessories  
Unipo800 Economic Grinding / Polishing Machine with Complete Diamond Lapping Accessories
 
Detailed Description

Unipo800 Econnomic 8" Grinder / Polishing Machine with Complete Accessories

Unipo800 is a complete grinding and polishing machine which is designed for material research laboratory with affordable price for researchers and graduate students.  The 5-step diamond accessory kit  ( value ) makes it possible to grind, shape and polish all types of materials, such as glass, quartz, ceramic and metallic sample . Unipol 800 is quiet and easy to clean up.   It includes all necessary diamaond accessories and let you work immediately.

Standard Package                               

  • Coolant reservoir ( top black) with valve and drain container ( botton black) are included for operating machine everywhere.
  • Five disc backing plates ( Master plate)
  • Four PSA Diamond lapping plates at  vaious mesh ( clcik underline to see specs and cost for replacement )
    • One 320 mesh  PSA plate
    • One  600 mesh PSA plate
    • One 1200 mesh PSA plate
    • One 1800 mesh PSA plate
  • Two Black PSA polish pad for final polishing
  • One 10 g 0.25 microm diamond compound for final polishing
  • Complete Instructions

Specifications                           

 Motor:    1/4 HP equivalent Ball Bearing DC
 Voltage:  115V AC (220V AC as option at extra cost)
 Speed:  500 to 3,000 rpm
 Drive:       Direct Drive on 2" Flange
 Dimensions:   12" x 12" x 7"
 Weight:              18 lbs. including accessories
 Shipping Dimensions:   18" x 20" x 15"
 Shipping Weight:    30 lbs.

 

 
   

 Coolant reservoir on the top allows to operate in everywhere Take off splash guard - Easy to clean the polisher

 5 master plates + 4 PSA diamond lapping plate + 5g 0.25 micron diamond compund + 1 polished pad 

 

Unipo801 Multi Purpose Precision Polishing Machine with York Support & Complete Accessories  
Unipo801 Multi Purpose Precision Polishing Machine with York Support & Complete Accessories
 
Detailed Description

Unipo801 Multi-Purpose 8" Precision Polishing Machine

UNIPO801  polishing machine is equipped with  8" super flat Aluminum lapping plate and one york sample support, as well as complete diamond lapping accessories.    It can be used as a standard manual grinder, or automatic lapping / polishing machine for both of flat sample and metallurgraphic samples.  It is the most cost effective solution for material research lab.

Features :

  • Heavy duty cast aluminum case with beautiful painting surface .
  • Beldrive with hig htroque and quiet operation
  • 8" dia Super flat lapping plate ( Steel)
  • Condition ring with one 75 mm dia flat sample holder for lapping polishing flat component.
  • 3" dia. flat sample holder for polishing flat sample
  • 75 mm dia. sample holder with three holes to allow polishing three metallurgraphic samples up to 1" dia. at one time , which is available as optional  
  • Two dead weights to increase polishing pressure.
  • York supporter to allow polishing automatically
  • Complete accessories for grinding, lapping and polishing, including:
    • Two 8 " PSA Diamond Lapping plates with 320 mesh and 600 mesh separately for fast lapping/grinding
    • Two 8 " PSA polishing pads for final polishing
    • 10g  0.5 micron diamond paste for faster polishing

Specifications

  • Power:                               120V or 240 V selectable via a switch 
    Motor:                                 0.25 KW high torque DC motor with one year warranty
    Variable speed:               from 0 - 600 RPM 
    Dimension:                      525 L x 350 W X325 H (mm)
     
    Aprox. net weight:            30 Kg  
  • Package dimension:      40" x 34" x 32"
  • Shipping weight:             63 kg  (140lbs )   

 TEL : 02-868-0661 (代)                                                          pcb21@korea.com                                 

 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.

 

Unipo802 (8" ) Precision Auto Lapping and Polishing Machine with two work stations  
Unipo802 (8" ) Precision Auto Lapping and Polishing Machine with two work stations
 
Detailed Description

 UNIPO802 machine is equipped with 8" super flat lapping plate and can be used as a high precision lapping machine for polishing crystal components, semiconductor wafers, and ceramic substrates up to 3" in diameter. It can be used as a standard grinding and polishing machine for preparing metallographic samples as well.  Combining with flat sample holder (included),  three hole metallographic sample holder (optional ), and precision thinning fixture ( optional), Unipol 802 can lap and polish various samples automatically.

Features:

  • Precision rotating shaft with running off < 5 micron
  • Two super flat lapping plate with flatness < 2.5 micron / Inch2
  • one cast iron plate for lapping and one cast aluminum plate for polishing
  • Heavy duty cast aluminum case with bright painting
  • Two rocking work stations with wafer holders and condition rings can be controlled independently for polishing 2 pcs of  3" wafers in one running
  • Variable speed from 0 to 125 RPM with digital display
  • Adjustable timer for auto-stop up to 99 hours
  • As optional parts auto slurry feeder and precision polishing fixture are available for polishing automatically 

 Unipol 802 (8    

Typical Specifications

 
 Super-Flat 8" Lapping Plate  Flatness < 2.5 micron / inch2
 Precision Rotating Shaft  Running Off < 5 micron
 Heavy Duty Cast Aluminum Case with Painting  Color : Black
 Two Work Stations with 80 Rocking and adjustable speed   0 - 20 rocking / minute
 Two flat sample holders for carring < 3" diameter wafer  80 Dia. x 35 T mm
 Two Condition Rings  95 O.D. x 88 I.D. x 32 T mm
 Variable Speed of Master Plate with Digital Display  0 ~ 125 rpm
 Adjustable Timer for Auto-Stop  0 - 99 hours
 Automatic Slurry Feeder  Optional for automatic polishing
 Power  120V or 240 V selectable via switch
 Motor  300 W high torque DC motor
 Dimension  525 L x 350 W x 325 H (mm)
 Weight (without packing)  120 lbs 
 Warranty  one year
 Package Dimension  40" x 38" x 30"
 Shipping Weight  160 lb

Standard Package:

 

 P/N

 Item name

 DUP802-01

 DUnipo802 Polishing Machine

 DUP802-02

8" Cast Iron Polishing Plate with Machine 

 DUP802-03

8" Cast Aluminum Polishing Plate 

 DUP802-04

Condition Ring 

 DUP802-05

3" Sample Flat Holder 

 DUP802-06

8" Polyamide Foam Polishing Pad 

 DUP802-07

 8" Poromeric Polishing Pad (PSB)

 DUP802-08

 Screw Drivers

 DUP802-09

 Power Core

 DUP802-10

Operation Manual


Optional Parts:

 

 P/N

 Item name

UPO802-11

 SKZD-2 Automatic Slurry Feeder 

PF-2-1

 2" Polishing Fixture for Precision / Automatic Thinning and Polishing

 PF-3H1W2

 Polishing Sample Holder with Three 1" Holes for Metallurgraphy

 TEL : 02-868-0661 (代)                                                          pcb21@korea.com                                 

 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.

 

Unipo1000 (10" ) Precision Auto Polishing Machine with 6" Power Head  
Unipo1000 (10" ) Precision Auto Polishing Machine with 6" Power Head
 
Detailed Description

 

UNIPO1000 is designed for preparing metallurgraphic, ceramic and optical sample faster / better.  It equiped with 10" dia  mater plate and pressure adjustable rotation head and can polish multi samples in one time.

Features:

  • Touch pad switches control polishuing time and speed
  • Variable Platen speed from 50 - 600 RPM with didgital display
  • Variable power head platen speed between  0-100 RPM
  • Adjustable power head force between 1- 200 N
  • Variable cycle time from 0 - 999 seconds
  • Two sets of sample platens  (6" Diameter)  are included which can be changed quickly
    • One platen for polishing flat sample, which can mount 7 pcs 2" wafers on one plate
    • One holder plate has 6 holes ( 1" diameter) , which can mount 1" diameter or less  samples upto 6 pcs
  • coolant or slurry feed system are built in with control valve
  • Polishing program can be set up in the front panel  ( polishing time ) and make polishing procedure consistent in every running.
  • Two years limited warranty

Main Specifications

  • DC Motor Power:                  1.5KW
  • Input Power:                         208 - 240V AC  single phase, 50-60 Hz.
  • Mater Lapping plate:            10" ( 250 mm ) diameter
  • Polishing time set- up:         0 - 999 seconds
  • Sample Holder Head:           6" diameter
  • Head pressure:                    1 - 200 N
  • Overall Dimension:              660x380x640mm
  • Net Weight:                          45 kg    ( 100 lb)
  • Shipping dimension              40" x 38" x 42"
  • Shipping weight                   72.5 kg    ( 160 Lb)

Package and accessories

  • One 10" cast Alunimum lapping plate
  • Two sample holder heads
  • Ten pcs SiC abbrasive sand papers
  • One water pipe for draining water

 

2" Polishing Fixture for Precision / Automatic Thinning and Polishing  
2" Polishing Fixture for precision Thinning and Polishing

Detailed Description

 

 

 Features:
  • Precision Polishing Jig for accurate wafer / substrate polishing and backthining
  • 2" Diameter sample holder to take wafer or substrate up to 2"
  • Thickness control screw fixture with resolution of 0.005 mm to limit stock remove
  • Two micrometers are including with resolution of +/- 1 microm for more accurate controll polishing remove
  • Two dead weighs are included for adjusting polishing gravity
  • This Polishing fixture can fit with Unipol801, Unipol802 and any precision 8" polishing machine with York support to achieve automatic polishing or thining.
  • Excellent for reparation of TEM sample and  IC section analysis and Flat single crystal substrates

 

 
 

 

 TEL : 02-868-0661 (代)                                                          pcb21@korea.com                                 

 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.


Related Products

 

SKCH-1 Precision Thickness Checker with 0.001 mm Dial Indicator

 

 

Unipol 802 (8" ) Precision Auto Lapping and Polishing Machine with two work stations

 

 

Model 250 Digital Controlled Alumnium Hot Plate for Mounting Samples ( 8.4" x5") - EQ-HP-1220

 

Unipo1210 Heavy Duty ( 12") Precision Grinding / Polishing Machine with Magnetic Plate & Complete Accessoies  
Unipo1210 Heavy Duty ( 12") Precision Grinding / Polishing Machine with Magnetic Plate & Complete Accessoies
 
Detailed Description

Unipo1210  Heavy Duty 12" Grinding / Polishing Machine with Magnetic Plate & Complete Accesories

UNIPOL- 1210  grinding / polishing machine is equipped with  12" Magnetic lapping plate and complate  accessories, including  steel buffer sheet, sand paper, polishing pad, diamond lapping plate and diamond paste for  immediate use.    The upgraded magnetic plate technology allows you install and  take off  sand paer and polishing pad quickly and easily.  UNIPOl-1210 can be used as a standard manual grinder, or  lapping / polishing machine for both of flat sample and metallographic samples.  It is the most cost effective solution for material research lab to prepare metallographic samples and failure analysis

Features :

  • Heavy duty steel case with beautiful painting surface.
  • Power:                                    120V or 240 V  auto switching power supply, worldwide support
  • Motor:                                      300W high torque DC motor with one year warranty
  • Variable speed:                     from 0 - 600 RPM with digital display
  • Emergency Stop                    Front Power Switch  for easy stop
  • Dimension:                             560  L x 345 W  X 325 H (mm) 
  • Aprox. net weight:                  42 Kg   
  • Dimension of shipment:      36" x 30" x 22"
  • Weight of shipment:              140 Lbs
  • 12" dia Aluminum alloy lapping plate  is pre-installed  with permanent magnetic sheet and allows you to attach diamond lapping plate directly with PSA , and to attach sand peper or polishing pad via steel buffer sheet
  • Complete accessories included for immediate using, including:  ( > $500 value, click underlined to order extra)
    • One Aluminum alloy master  plate  12" dia lapping plate
    • Two 12" dia.x 0.8 mm thick permanent magnetic sheet with PSA backing ( one installed in Aluminum plate and one for replacement )
    • Two 12" dia. Diamond Lapping plates with 320 mesh and 600 mesh separately (without PSA, can be attach to mangnetic plate directly )
    • Four 12" dia x 0.7mm thick steel buffer sheet (Zinc coated) for carrying sand paper and polishing pad, which can be attached to magnetic plate at stable and take off at easy
    • Eight pacs 12" Sic sand papers ( 2 eack at mesh of 240#, 400# , 800# # 1200# )
    • Two 12" PSA black polishing pads for final polishing 
    • One 10g  0.5 micron diamond paste for faster polishing

           

  •  
     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 TEL : 02-868-0661 (代)                                                               pcb21@korea.com

 

UNIPO1501(15") PRECISION LAPPING & POLISHING MACHINE  
Unipo1501 -polishing machine with three fixed work stations

Detailed Description
    UNIPO1501 machine equips with 14 -15" diameter super flat lapping plate and can be used as a high precision lapping machine for polishing crystal components, semiconductor wafers, and ceramic substrates up to 4" diameter with three work stations. It also can be adopted a standard grinding and polishing machine for preparing metallographic samples. 
      DAC provides you with cost effective polishing machine to meet your budget and application.

Features of Unipol 1501

Specifications of Unipol 1501
  • Precision rotating shaft with running off < 5 micron
  • Two super flat lapping plate with flatness < 0.25 micron / inch2, one cast iron plate for lapping and one cast aluminum plate for polishing
  • Heavy duty cast aluminum case with bright painting
  • Three fixed work station with wafer holder and condition ring, which can polish 3 pcs of 4" wafers and 9 pcs of 2" wafers in one running
  • Variable speed from 0 to 500 RPM with digital display
  • Adjustable timer for auto-stop up to 99 hours
  • Optional auto slurry feeder
  • Power: 120V or 240 V selectable
  • Motor: 0.26 KW high torque DC motor with one year warranty
  • Speed: Variable from 0 to 500 RPM with digital display
  • Timer: 1 minute ~ 99.99 hours
  • Condition ring: 140 OD x 108 ID x 25 T ( mm )
  • Wafer Holder: 105 Dia. x 32 T ( mm )
  • Dimension: 650L x 510W x 300H (mm)
  • Weight: 95 Kg
  • Package dimension: 36" x 30" x 20"
  • Shipping weight: 220 lbs 
 



Related Products

 

 

15" Polyamide Foam Polishing Pad

 

 

2" Polishing Fixture for Precision / Automatic Thinning and Polishing

 

 

Colloidal Alumina (Al2O3) Slurry, 16 OZ/ bottle 1.0 Micron

 

 

Colloidal Silica (SiO2) Slurry for CMP, 16 Oz/ bottle at 0.05 micron

 

 

Diamond Compund Polishing Paste, 0.5 Micron, 10 gram

 

 

15" Poromeric Polishing Pad ( PSA)for Final Polishing

 

 

Diamond Compund Polishing Paste, 2.5 Micron 10 grams sryinge

 

 

SKZD-2 Automatic Slurry Feeder for any 8" -15" polishing machine

 

 

Diamond Compund Polishing Paste, 3.5 Micron 10 grams sryinge

 

 

Diamond Compund Polishing Paste, 5.0 Micron 10 grams sryinge

 

 

 TEL : 02-868-0661 (代)                                                          pcb21@korea.com                                 

 소모품은 여기를 클릭하여 주시면 자세한 스팩이 나옵니다.

 

Unipo1202 (12" ) Precision Auto Lapping and Polishing Machine with Two 4" Work Stations, EQUnipo1202  
Unipo1202 (12" ) Precision Auto Lapping and Polishing Machine with Two 4" Work Stations
 
Detailed Description

UNIPO1202 machine is equipped with 12" super flat lapping plate and can be used as a high precision lapping machine for polishing crystal components, semiconductor wafers, and ceramic substrates up to 4" in diameter. It can be used as a standard grinding and polishing machine for preparing metallographic samples as well.  With combination of polishing auxiliaries, such as flat sample holder ( included)  three hole metallographic sample holder  (Optional ), precision Thinning fixture (optional), and slurry feeder (optional), Unipol 1202 can lap and polish various samples automatically.

Features:

  • Precision rotating shaft with running off < 5 micron
  • Two super flat lapping plate with flatness < 0.25 micron / Inch2 .  One cast iron plate for lapping and one cast aluminum plate for polishing
  • Heavy duty cast aluminum case with bright painting
  • Two rocking work stations with wafer holders and condition rings, which can be controlled independently for polishing 2 pcs of  4" wafers in same time.
  • Variable speed from 0 to 150 RPM with digital display
  • Adjustable timer for auto-stop up to 99 hours
  • Auto slurry feeder is an optinal part for polishing automatically 

Typical Specifications

 
 Super-Flat 12"  ( 300 mm)  Diameter Lapping Plate  Flatness < 0.25 micron / inch2
 Precision Rotating Shaft  Running Off < 3 micron
 Heavy Duty Cast Aluminum Case with Painting  Color : Black or White
 Two Work Stations with 80 Rocking and adjustable speed   9 rocking / minute
 Two flat sample holders for carring < 4" dia. wafer  105 Dia. x 35 T mm
 Two Condition Rings 120 O.D. x 110 I.D. x 32 T mm
 Variable Speed of Master Plate with Digital Display  from 0 ~ 150 rpm
 Adjustable Timer for Auto-Stop  0 - 99 hours
 Automatic Slurry Feeder  Optional for automatic polishing
 Power  120V or 240 V selectable via switch
 Motor  300 W high torque DC motor
 Dimension  700 L x 475 W x 300 H (mm)
 Weight  154 lbs 
 Dimension of shipment  43" x 31" x 33"
 Weight of shipment  200 Lbs
 Warranty  one year

  TEL : 02-868-0661 (代)                  pcb21@korea.com  


Related Products

 

Unipo802 (8" ) Precision Auto Lapping and Polishing Machine with two work stations

 

 

UNIPO1502 (15") Precision Automatic Lapping / Polsihing Machine with Three 4" Work Stations

 

 

Unipo300 Mini (3") Automatic Grinder/ Polisher with Complete Accessories

 

2" Polishing Fixture for Precision / Automatic Thinning and Polishing

 

 

DSKCH-1 Precision Thickness Checker with 0.001 mm Dial Indicator

 

 

DSKZD-2 Automatic Slurry Feeder for any 8" -15" polishing machine

Email this to a friend

UNIPOL1502 (15") Precision Automatic Lapping / Polsihing Machine with Three 4" Work Stations  
UNIPOL1502 (15") Precision Lapping / Polsihing Machine with Three 4" Work Stations

Detailed Description
   UNIPO1502 machine equips with 14 -15" diameter super flat lapping plate and can be used as a high precision lapping machine for polishing crystal components, semiconductor wafers, and ceramic substrates up to 4" diameter with three work stations. It also can be adopted a standard grinding and polishing machine for preparing metallographic samples. 
      MTI provides you with cost effective polishing machine to meet your budget and application.
 Features of Unipo1502
  • Precision rotating shaft with running off < 5 micron
  • Two super flat lapping plate with flatness < 0.25 micron / Inch2
  • one cast iron plate for lapping and one cast aluminum plate for polishing
  • Heavy duty cast aluminum case with bright painting
  • Three rocking work stations with wafer holders and condition rings.
  • They can be controlled independently for polishing 3 pcs of  4" wafers or 9 pcs of 2" wafers in one running
  • Variable speed from 0 to 80 RPM with digital display
  • Adjustable timer for auto-stop up to 99 hours
  • Auto slurry feeder is an optinal part for polishing automatically 
 Specifications of Unipo1502
  • Power: 120 V or 240 V selectable
  • Motor: 0.26 KW high torque DC motor with one year warranty
  • Speed: Variable from 0 to 80 RPM with digital display
  • Timer: 1 minute ~ 99.99 hours
  • Condition ring: 140 OD x 108 ID x 25 T ( mm )
  • Wafer Holder: 105 Dia. x 32 T ( mm )
  • Dimension: 650L x 510W x 300H (mm)
  • Weight: 95 Kg
  • Package dimension: 45" x 45" x 31"
  • Shipping weight: 250 lbs 

 

Standard Package:

 P/N

 Name and the price for replacement

 Qty..

 Thumb Picture

 DUP1502-01

 Unipo1502 Polishing Machine

 1

 DUP1502-02

 15" Cast Iron Polishing Plate

  1 

 DUP1502-03

 15" Cast Aluminum Polishing Plate 

 1

 DUP1502-04

 Condition Ring

 3

 DUP1502-05

 Sample Holder

 3

 DUP1502-06

 15" Polyamide Foam Polishing Pad

 1

 DUP1502-07

 15" Poromeric Polishing Pad (PSB)

 1

 DUP1502-08

 Screw Drivers 

 1 set

 DUP1502-09

 AC Power Cord 

 1

 DUP1502-10

 Operation Manual 

 1

 DUP1502-12  Drian Hose and Water Hose  1 set  

Optional Parts:

 
  P/N  Name and the price for replacement  Qty.  Thumb Picture
 DUPO1502-11  SKZD2 Automatic Slurry Feeder  1  




Related Products

 

Colloidal Silica (SiO2) Slurry for CMP, 16 Oz/ bottle at 0.05 micron

 

 

Model250 Digital Controlled Alumnium Hot Plate for Mounting Samples ( 8.4" x5") - EQ-HP-1220

 

 

Unipo1202 (12" ) Precision Auto Lapping and Polishing Machine with Two 4" Work Stations, EQ-Unipol1202

 

 

15" Poromeric Polishing Pad ( PSA)for Final Polishing

 

 

DSKZD-2 Automatic Slurry Feeder for any 8" -15" polishing machine

 

 

Unipo802 (8" ) Precision Auto Lapping and Polishing Machine with two work stations

TEL : 02-868-0661 (代)                  pcb21@korea.com

 

연마(Polishing) 처리후 연마가 된 부위에 연마 상태를 0.001 mm 까지측정이 가능한 옵션 제품이 상기 모든 폴리셔에 적응이 가능합니다.

 

DSKCH-1 Precision Thickness Checker with 0.001 mm Dial Indicator  
DSKCH1 Precision Thickness Measurment with 0.001 mm Dial Indicator

Detailed Description
DSKCHI is a simple, cheaper, and precision device for measuring thickness of crystal wafer or any sample during lapping and polishing. The fixture consists of a precision granite flat plate and a precision dial indicator with a resolution of 0.001 mm.

 

  Model : CP-8-1 (폴리셔 8인치 1구), CP-8-2 (폴리셔 8인치 2구), Model : CP-10-1 (폴리셔 10인치 1구), CP-10-2 (폴리셔 10인치 2구)

 

     

     

 

 

polisher,폴리셔,시편연마기,polishing machine

 

1. Type : Single Disc Type

   (Wheel Disc 교환용)

 

 Model : CP-8-1 (폴리셔 8인치 1구), CP-10-1 (폴리셔 10인치 1구)

 

*Motor : DC 1/2HP(0.4kw) 1 phase

 

*Rotation speed : 100 to 800 rpm

 

*Wheel Disc Diameter : (8inch or 10inch) x 16t

 

*Wheel Disc Spare : 2ea (pin 3 hole)

 

*수돗물 공급방법 : ON/OFF Switch Controlled

          by Electric Solenoid Valve

 

*RPM Display : rpm Meter 부착

 

*Dimension : 410 x 705 x 320(W x D x H)mm

 

*Wheel Disk 구동방법 : Motor Shaft와 Wheel Shaft   를 V-Belt로 연결하여 구동시킴

 

 

 

polisher,폴리셔,시편연마기,polishing machine

 

2. Type : Double Disc Type

   (Wheel Disc 교환용)

 

 Model : CP-8-2 (폴리셔 8 인치 2구), CP-10-2 (폴리셔 10 인치 2구)

 

*Motor : DC 1/2HP(0.4kw)x 2ea  1 phase

 

*Rotation speed : 100 to 800 rpm

 

*Wheel Disc Diameter : 8inch x 16t

 

*Wheel Disc Spare : 3ea (pin 3 hole)

 

*수돗물 공급방법 : ON/OFF Switch 부착에 의한

           Electric Solenoid Valve

 

*RPM Display : rpm Meter 부착 (2ea)

 

*Dimension : 755 x 700 x 320(W x D x H)mm

 

*Wheel Disk 구동방법 : Motor Shaft와 Wheel Shaft   를 V-Belt로 연결하여 구동시킴

 

  

     

 

상기 제품은 본사에 의해 외형이 변할 수 있으며 그외에 주문 제작도 가능하오니 필요하신 사양을 이메일로 문의 하십시오.

 

 TEL : 02-868-0661 (代)                                                          pcb21@korea.com                                 

 

 Abrasive Sand Paper Discs

Comparison Chart of Abrasive Grade --- Choose snad paper correctly

U.S. Mesh

60

80

100

120

150

180

220

|

240

|

280

320

|

360

400

|

600

|

800

|

|

1200

|

|

|

|

|

|

|

European FEPA or P-Grading

|

|

|

|

|

|

60

80

|

120

|

180

|

220

280

320

360

400

500

600

800

1000

1200

|

2400

|

|

4000

|

|

|

|

|

|

|

|

|Standard Micron Grading

|

|

|

|

|

|

|

|

260

200

160

125

100

80

68

60

52

46

40

35

30

26

22

18

15

12

10

9

6

5

SiC Sand Disc ( Plain back ), Waterproof 8" 240 -2000 Grit Optional, 20 pcs

SiC Sand Disc ( PSA ), Waterproof, 8" Diameter 240 -2000 grit optional 10 pcs

SiC Sand Disc ( Plain back ), Waterproof, 12" Diameter 240-2000 grit optional 20 pcs

SiC Sand Disc ( PSA ), Waterproof, 12" Diameter 240 -2000 grit optional 10 pcs

 

Diamond blades, diamond wire, SiC blades, and Al2O3 blades

3"Dia x 0.2 mm x0.5" arbor Fully Sintered Diamond Cutting Blades For Low Speed Saw - DF0302

3"Dia x 0.3 mm x 0.5"arbor Fully sintered Diamond Cutting Blades For Low Speed Saw - DF0303

86 mm OD x 0.1 mm thickness Diamond Cutting Blades with 0.5" arbor Flange

86 mm OD x 0.1 mm thickness Diamond Dicing Blades

Three 4"Dia x 0.3 mmx0.5" arbor Impregnated Diamond Cutting Blades For Cutting Saw- - Low Cost - IPDB40305

4"Dia x 0.35 mm t x 0.5" arbor Fully Sintered Diamond Cutting Blades For all brands Low Speed Saw - DF0403

4" Dia x 0.014" t x0.5" arbor Sintered Diamond Blade - DB153742

Two 6 1/2" Dia x 0.5mm t x0.5" arbor Impregnated Diamond Cutting Blades - IPDB6050505

6" Dia x 0.014"t x 5/8" arbor Metal Bond Diamond Wafering Blade - MBD0504

6" Dia x 0.014" t x0.5" arbor Sintered Diamond Blade - DB153744

8" Dia x 0.025" t x1.0" arbor Sintered Diamond Blade - DB-153741

One 37.7" (96 cm) loop diamond blade for MT100 Mini Diamon Band Saw

Diamond Wire of 0.25 mm Dia. x 100 Meter (333 feet) for Wire Saw Cutting - DW025x100

Diamond Wire of 0.28 mm Dia. x 65 m L ( 215 feet) for Wire Saw Cutting - DW028x60

Diamond Wire of 0.25 mm Dia. x 200 m L ( 666 feet) for Wire Saw Cutting - DW025x200

One 0.3 mm Thick Diamond Loop Wire ( 84 cm ) for SXJ-2 Wire Saw - SXJPW3

One 0.2 mm Thick Plain Steel Loop Wire for Cutting Almost All Materials by Feeding Selected Slurry - SXJOPW2

4"Dia x 0.4 mm x0.5" arbor SiC Abrasave Cutting Blades For Low Speed / Trim Saw (SC0404)

7" Dia x 0.03" t x0.5" arbor SiC Abrasave Cutting Blades For Cut-off Saw ( MT6) - SC0708

10" Dia x 0.075" t x1.25" arbor SiC Abrasave Cutting Blades For Cut-off Saw ( MT200) - SC1075

14" Dia x 0.075" t x1.25" arbor SiC Abrasave Cutting Blades For Cut-off Saw ( MT350) - SC1408

4"Dia x 0.4 mm x0.5" arbor Alumina Abrasive Cutting Blade For Low Speed / Trim Saw (AL0404)

 

 

Displaying products 1 - 12 of 12 results   

TEL : 02-868-0661 (代)                            pcb21@korea.com    


 

Comparison Chart of Abrasive Grade --- Choose snad paper correctly

U.S. Mesh

60

80

100

120

150

180

220

|

240

|

280

320

|

360

400

|

600

|

800

|

|

1200

|

|

|

|

|

|

|

European FEPA or P-Grading

|

|

|

|

|

|

60

80

|

120

|

180

|

220

280

320

360

400

500

600

800

1000

1200

|

2400

|

|

4000

|

|

|

|

|

|

|

|

|Standard Micron Grading

|

|

|

|

|

|

|

|

260

200

160

125

100

80

68

60

52

46

40

35

30

26

22

18

15

12

10

9

6

5

 

 

 

Electro-plated 8" Dia. Diamond Grinding Plate

 

 

Electro-plated 12" Dia. Diamond Grinding Plate

 

 

8" Dia. Diamond Lapping Film

 

 

 

Comparison Chart of Abrasive Grade --- Choose snad paper correctly

U.S. Mesh

60

80

100

120

150

180

220

|

240

|

280

320

|

360

400

|

600

|

800

|

|

1200

|

|

|

|

|

|

|

European FEPA or P-Grading

|

|

|

|

|

|

60

80

|

120

|

180

|

220

280

320

360

400

500

600

800

1000

1200

|

2400

|

|

4000

|

|

|

|

|

|

|

|

|Standard Micron Grading

|

|

|

|

|

|

|

|

260

200

160

125

100

80

68

60

52

46

40

35

30

26

22

18

15

12

10

9

6

5

Our standard diamond paste is 10 g per sringe and the competitive price is for only purchase only. Please directly order them below and enjoy quantity discount. If you order larger quanity ( >100 sringes) , please contact us at pcb21@korea.com

Displaying products 1 - 11 of 11 results                                                TEL : 02-868-0661 (代)                            pcb21@korea.com      

Diamond Compund Polishing Paste, 0.25 Micron, 10 gram sryinge

Diamond Compund Polishing Paste, 0.5 Micron, 10 gram

Diamond Compund Polishing Paste, 1.0 Micron, 10 grams sryinge

Diamond Compund Polishing Paste, 2.5 Micron 10 grams sryinge

Diamond Compund Polishing Paste, 3.0 Micron, 10 grams sryinge

Diamond Compund Polishing Paste, 3.5 Micron 10 grams sryinge

Diamond Compund Polishing Paste, 5.0 Micron 10 grams sryinge

Diamond Compund Polishing Paste, 7.0 Micron 10 grams sryinge

Diamond Compund Polishing Paste, 14 Micron 10 grams sryinge

Diamond Compund Polishing Paste, 28 Micron 10 grams sryinge

Compund Polishing Paste, 54 Micron Diamond 10 grams sryinge

8" Poromeric Polishing Pad ( PSB) for final polishing

12" Poromeric Polishing Pad ( PSB) for final polishing

15" Poromeric Polishing Pad ( PSA)for Final Polishing

15" Polyamide Foam Polishing Pad

8" Polymide Foam polishing Pad

Three 3" Poromeric Polishing Pad ( PSB) for Final polishing

LubeCool -150 Smart Solid Lubricant and Coolant for Diamond Saw Cutting

Colloidal Alumina (Al2O3) Slurry, 16 OZ/ bottle 1.0 Micron

Colloidal Silica (SiO2) Slurry for CMP, 16 Oz/ bottle at 0.05 micron

2 pcs of high quality wax bulks for samples bounding

10 pcs of high quality wax rods for gluing samples

Wafer Bonding Tape for Vacuum Chuck in EC400 or any Dicing Saw

Cold Mounting Fast-Curing Epoxy with hardener ( 32 Oz Epoxy; 8 Oz Hardener)

Cold Mounting Low Viscosity Epoxy with Hardener ( 32 Oz Epoxy; 8 Oz Hardener)

Compression Mounting Powder (5 Lb) optional color of Black, Red , Green

Reuseable Plastic Mold for Cold Mounting, 1.5" diameter

Reuseable Plastic Mold for Cold Mounting, 1.25" Diameter

Reuseable Plastic Mold for Cold Mounting, 1 " Diameter

Metal Sample Clip for Cold Mounting - 10 pcs/pkg

CXQ1500 Vacuum Cold Mounting Device

MP300 Mounting Press for Metallographic Samples

LubeCool -150 Smart Solid Lubricant and Coolant for Diamond Saw Cutting

Heavy Duty Immersion Coolant Pump for Cutting Saw

Diamond Blade Dressing Stone

Mini Vise for 150 low Speed Saw

Mini Vise for 150 low Speed Saw

Precision Cross Mount Vise for EC400 dicing and 150 Low Speed

Precision Cross Mount Vise for SXJ-2 Diamond Wire Saw

Heavy Duty Immersion Coolant Pump for Cutting Saw

Diamond Blade Dressing Stone

Multi-Blade Spacer 10 mm thickness for SYJ-150 Low Speed Saw

Multi-Blade Spacer 1/2" thickness for SYJ150 Low Speed Saw

SKCH-1 Precision Thickness Checker with 0.001 mm Dial Indicator

SKCH-III Precison Thickness Checker with 0.001 mm digital LCD dial

Two 8" Mater Plate ( Backing Plate ) for PSA Diamond plate, Sand Paper & Polishing Pad

2" Polishing Fixture for Precision / Automatic Thinning and Polishing

3" Polishing Sample Holder with Three 1" Holes / Two Dead Weight for Metallurgraphy

YJXZ-12 Stainless Steel Abrassive Slurry Pump

SKZD-2 Automatic Slurry Feeder for any 8" -15" polishing machine

 

 

TEL : 02-868-0661 (代)                            pcb21@korea.com

 

시편 연마 광택기(Polishing Machine)

     

     

 

    본 기기는 금속재료의 조직 및 경화깊이를 측정하고자 하는 시료의 표면처리기로서 탁상용 또는 입식용이 있습니다

 

-Wheel은 고정용이 있고 교환용이 있으며, Wheel 재   질은 Aluminium Dura Plate 6061을 가공 사용함

 

-Wheel 크기는 10inch, 12inch 등이 있으며 주문제작함

 

-Wheel 회전 RPM은 100단위로 1650rpm까지 조절됨

 

-Motor는 DC(단상) 1/4 또는 DC 1/2HP

 

-제품크기(예)

 

  탁상용(1구)

  400W X 700D X 320H(mm)

 

  입식용(2구)

  850W X 570D X 700/200(mm)

  

     

 

 TEL : 02-868-0661 (代)                  pcb21@korea.com

 

CUT 350 Dac-1

CUT 350 Cutting Machine은 Abrasive Cut Off Wheel을 사용하여 수동으로 시료를 절단하는 대형 절단기 입니다.

Wheel을 상하로 움직여서 시료를 절단하는 것으로 단조품, 열처리된 고강도 금속, 합금강, 세라믹 등을 절단할 수 있다.

Wheel의 구동방식은 Motor Shaft와 Wheel Shaft를 V-Belt로 연결하여 절단 Wheel을 구동시킨다.


특징

Vise는 Screw Type 양지 Vise이며 시편 물림부는 열처리되고 표면처리는 경질도금 또는 착색처리 되었다.

Vise 밑판 Bed는 T형 Bed로서 Vise를 전후로 이동 Clamping 시킬 수 있어 고정된 Wheel에 절단하고자 하는 시료 크기에 따라서 위치를 선정 Setting 하여 절단할 수 있다.

또한 Wheel Size를 10inch ~ 14inch의 Wheel을 장착하여 겸용으로 사용할 수 있다.

600mm 폭의 넓은 절단실과 절단 저석의 사이의 큰 공간이 작업성을 높이고 긴 시료도 절단하기에 편리하게 설계되었다.

조명 Lamp가 기기 외부에 설치되어 있어 누전 방지 및 Limit S/W가 부착되어 있어 Hood가 열릴 때에는 전원이 끊어진다.



 

                   格 (wbs-1020)
 Wet Belt Sander ( 1구 )                      
1) 전원 : 220v 60Hz 3상
2) Motor : AC 1 HP ( 1.5 Kw )
3) Belt 크기 : 100W X 950L
4) 회전수 : 100 ~ 1800 rpm
5) 집진설비 : 포집 Tank 설치
6) Case 재질
  Belt Grinder Box: SUS 304 정밀용접
  Body Case: SS41 Plate 1.5t
6) Water Spray : On/off Switch By Electric
                Solenoid Valve
7)도장: Ivory 분체도장
8) Dimension : 550 W X 820 D X 750/150 H
9) A/S 기간 : 12 개월
 
 

 

                   格 (wbs-1020-1)
    Wet Belt Sander ( 2구 )                       
1) 전원 : 220v 60Hz 1 Phase
2) Motor : AC 1 HP ( 1.5 Kw )x2ea
3) Belt 크기 : 100W X 950Lx2ea
4) 회전수 : 100 ~ 1800 rpm
 
5) Case 재질
  Belt Grinder Box: SUS 304 정밀용접
  Body Case: SS41 Plate 1.5t
6) Water Spray : On/off Switch By Electric
                Solenoid Valve
7)도장: Ivory 분체도장
8) Dimension : 700W X 820 D X 750/150 H
9) A/S 기간 : 12 개월
 

 

 

  

 TEL : 02-868-0661 (代)                            pcb21@korea.com    

                                                                                                                    Home